Balancer Shaft with Oil Pump Installation
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
Install the balancer and oil pump shaft assembly (2).
- Install the balancer and oil pump shaft assembly bolts (1) finger tight.
 Courtesy of GENERAL MOTORS COMPANY
|
Tighten the bolts twice in sequence:
- Tighten the bolts a first pass in sequence to 58 N.m (43 lb ft).
- Tighten the bolts a final pass in sequence to 58 N.m (43 lb ft).