LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4299280Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    If reinstalling, install the hydraulic valve lash adjuster in the previously marked positions.

    Lubricate the hydraulic valve lash adjusters with engine oil. Adhesives, Fluids, Lubricants, and Sealers 

  2. Hydraulic Valve Lash Adjuster (1) - Install
  3. Hydraulic Valve Lash Adjuster Arm Replacement  - Install