LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Arm Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4299084Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    If reinstalling, be sure to properly install using previously created marks.

    Lubricate the hydraulic valve lash adjuster arms with engine oil. Adhesives, Fluids, Lubricants, and Sealers 

  2. Install the 16 hydraulic valve lash adjuster arms (1).
  3. Exhaust Camshaft Replacement  - Install
  4. Intake Camshaft Replacement  - Install
scientia non olet · About LEMON Manuals