LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Transmission - Remove - Transmission Replacement
  2. GM4317933Courtesy of GENERAL MOTORS COMPANY

    Install the EN-652  holder (2), lock the automatic transmission flex plate via the starter ring gear.

  3. Automatic Transmission Flex Plate Bolt (1) - Loosen [8x]
  4. Remove the EN-652  holder (2).
  5. GM4317938Courtesy of GENERAL MOTORS COMPANY

    Automatic Transmission Flex Plate Bolt (1) - Remove and DISCARD [8x]

  6. Automatic Transmission Flex Plate (2) - Remove
scientia non olet · About LEMON Manuals