Lower Crankcase Removal
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Remove the 2 long lower crankcase bolts (1).
- Remove the 8 short lower crankcase bolts (2).
Loosen the 10 lower crankcase bolts in the sequence as shown.
Remove and DISCARD the 10 lower crankcase bolts (2).
- Loose the lower crankcase (1) from the engine block, use a suitable tool.
- Remove the lower crankcase (1).
- Clean the sealing surfaces.