Intake Manifold Installation
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Intake Manifold Gasket (2) - Install a NEW gasket.
- Intake Manifold (1) - Install
- NOTE:
Simplified graphic: Intake manifold is shown without intake manifold cover absorber.
Intake Manifold Bolt - Install [7x]
- Intake Manifold Bolt - Tighten in sequence [7x] 25 N.m (18 lb ft)
Intake Manifold Brace (1) - Install
- Bolt (2) - Install and tighten [2x] 10 N.m (89 lb in)
CAUTION: