Intake Manifold Disassemble
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Remove the intake manifold mount (2).
- Intake Manifold Cover Bolt (1, 3) - Remove [3x]
- Remove the intake manifold lower cover (4).
Intake Manifold Cover Bolt (1, 2) - Remove [5x]
- Remove the intake manifold upper cover (3).
Manifold Absolute Pressure Sensor Bolt (4) - Remove
- Manifold Absolute Pressure Sensor (5) @ Intake Manifold (1) - Remove
- Evaporative Emission Canister Purge Solenoid Valve Bolt (3) - Remove
- Evaporative Emission Canister Purge Solenoid Valve (2) @ Intake Manifold - Remove