Intake Manifold Assemble
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Evaporative Emission Canister Purge Solenoid Valve (2) @ Intake Manifold - Install
- Evaporative Emission Canister Purge Solenoid Valve Bolt (3) - Install and tighten 9 N.m (80 lb in)
- Manifold Absolute Pressure Sensor (5) @ Intake Manifold (1) - Install
- Manifold Absolute Pressure Sensor Bolt (4) - Install and tighten 5 N.m (44 lb in)
Install the intake manifold upper cover (3).
- Intake Manifold Cover Bolt (1, 2) - Install and tighten 4 N.m (35 lb in) [5x]
Install the intake manifold lower cover (4).
- Intake Manifold Cover Bolt (1, 3) - Install and tighten 4 N.m (35 lb in) [3x]
- Install the intake manifold mount (2) and tighten to 9 N.m (80 lb in).
CAUTION: