Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Coat the NEW O-ring seal (1) with a bit NEW engine oil.
- O-Ring (1) @ Fuel Injector (2) - Install [4x]
Fuel Injector (3) @ Fuel Injection Fuel Rail (1) - Install [4x]
- Apply thread lock agent to NEW fuel injector bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Fuel Injector Bolt (4) @ Fuel Injector (3) - Install and tighten 5 N.m (44 lb in) [8x]
- Electrical Connector (2) @ Fuel Injector - Connect [4x]
NOTE:
The EN-51146 - 2 - 5 calibrations tools must be installed.
NOTE:
Install NEW bolts.
CAUTION: