Exhaust Camshaft Removal
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
Mark camshaft bearing caps prior removal.
- Loosen the 12 exhaust camshaft bearing cap bolts (1), working from outside to inside in a spiral in steps of 1/2 up to 1 turn.
 Courtesy of GENERAL MOTORS COMPANY
|
Camshaft Bearing Cap Bolt (1) - Remove [12x]
- Camshaft Bearing Cap (2) - Remove [6x]
- Exhaust Camshaft (3) - Remove