Exhaust Camshaft Installation
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Coat the exhaust camshaft (1) and the exhaust camshaft bearing caps (2) with MoS 2 lubricating paste or engine oil. Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Exhaust Camshaft (1) - Install
- Ensure that the camshaft notch (3) at the front of the camshaft is in the 12 O ' clock position before installing the camshaft bearing caps.
- Camshaft Bearing Cap (2) - Install [6x]
- Camshaft Bearing Cap Bolt (4) - Install [12x]
- CAUTION:
Tighten the 12 exhaust camshaft bearing cap bolts (1) to 10 N.m (89 lb in), working from inside to outside in a spiral.