LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - Off Vehicle >> Engine Oil Cooler Housing Installation

Engine Oil Cooler Housing Installation

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4224556Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Install NEW seals.

    Engine Oil Cooler Seal (4) - Install

  2. Engine Oil Cooler Housing Seal (3) - Install
  3. Engine Oil Cooler Housing (1) - Install
  4. Engine Oil Cooler Mounting Plate Bolt (2) - Install and tighten [4x] 25 N.m (18 lb ft)