Engine Front Lower Cover Removal

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Remove the engine front cover M8 bolt (1).
Remove the engine front cover M10 bolt (3).
Remove the 7 engine front cover M6 short bolts (4, 6).
Remove the 2 engine front cover M6 long bolts (2, 5).
Courtesy of GENERAL MOTORS COMPANY

Install 2 engine front lower cover bolts (1, 3) to the intended bores, to loosen the engine front lower cover (2).
Courtesy of GENERAL MOTORS COMPANY

Remove the engine front lower cover (1).