LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Mechanical - 1.8L (LKN)) >> Diagnostic Information and Procedures >> Oil Pressure Diagnosis and Testing >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3216206Courtesy of GENERAL MOTORS COMPANY

    Turn off the engine.

  2. Remove the EN-498-B  gage (2).
  3. Remove the EN-6106  adapter (1).
  4. Install the engine oil pressure sensor. Refer to Engine Oil Pressure Sensor Replacement .
  5. Check the engine oil level.
scientia non olet · About LEMON Manuals