LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Mechanical - 1.8L (LKN)) >> Diagnostic Information and Procedures >> Cylinder Leakage Test >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the pressure loss tester.
  2. Remove the connection piece from the spark plug thread.
  3. Put the vehicle in neutral.
  4. Insert the oil dipstick.
  5. Install the coolant expansion tank closure cap.
  6. Install the spark plugs. Refer to Spark Plug Replacement .
  7. Install the engine management wiring harness to the intake manifold, cylinder head cover and engine wiring harness bracket.
  8. Raise the vehicle.
  9. Install the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement .
  10. Lower the vehicle.
scientia non olet · About LEMON Manuals