Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle. Lifting and Jacking the Vehicle
- Position two floor jacks with wood blocks under the engine and transaxle in order to support the powertrain assembly.
- Lower the vehicle. Lifting and Jacking the Vehicle
Loosen ONLY the engine mount to engine mount bolts (1). Engine Mount Replacement
- NOTE:
Only the transmission mount transmission side bolts should be loosened. Transmission mount bolts (1) should remain tightened during the balancing procedure.
Loosen ONLY the transmission mount transmission side bolts (2) at the left transmission mount (3). Transmission Mount Replacement (Left Side)