Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Upper Oil Pan Replacement - Remove
Push the oil pump drive chain tensioner (1) in direction of arrow.
- Lock the tensioner using a suitable tool (2).
- If replacing the oil pump, remove the oil pump flow control solenoid valve. Oil Pump Flow Control Solenoid Valve Replacement
- NOTE:
It may be necessary to leave one fastener in the pump assembly to secure the pump prior to removing it from the engine.
Loosen all the oil pump fasteners (1) securing the oil pump (2).
- NOTE:
Remove the last oil pump fastener while simultaneously tilting the pump in the direction of the arrow.
Remove the oil pump (1).
Remove and DISCARD the oil pump seals (1).