Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
Ensure the tensioner spring is retained in the correct position prior to installation.
Install the oil pump drive chain tensioner (2).
- Install the oil pump drive chain tensioner bolt (1) and tighten to 10 N.m (89 lb in).
Remove the suitable tool (2) from the oil pump drive chain tensioner (1).
- Engine Front Cover Replacement - Install
CAUTION:
Refer to Fastener Caution .