LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Mechanical - 1.5L (LFV)) >> Repair Instructions - On Vehicle >> Engine Wiring Harness Replacement - Oil Pan to Oil Pump Flow Control Solenoid Valve >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower Oil Pan Replacement  - Remove
  2. GM4008741Courtesy of GENERAL MOTORS COMPANY

    Disconnect the oil pump flow control valve harness connection (1).

  3. GM3974091Courtesy of GENERAL MOTORS COMPANY

    Disconnect the wiring harness (1) from the oil pump flow control harness.

  4. GM4032135Courtesy of GENERAL MOTORS COMPANY

    Remove the oil pump flow control wiring harness bolt (1)

    5. NOTE:

    If not replacing the harness inspect the O-rings and replace if necessary.

  5. Remove the oil pump flow control wiring harness (2) from the oil pan.
scientia non olet · About LEMON Manuals