Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Drain the cooling system. Refer to Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static) .
Remove the drive belt. Refer to Drive Belt Replacement .
Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement (LTG) .
Courtesy of GENERAL MOTORS COMPANY

Using the BO-38185 hose clamp pliers, remove the radiator outlet hose (1) from the water outlet (2).
Courtesy of GENERAL MOTORS COMPANY

Remove the engine harness retainer (1) from the water pump (2).
Courtesy of GENERAL MOTORS COMPANY

Remove the thermostat bypass pipe fasteners (1) and remove the thermostat bypass pipe (2) from the water pump.
Discard the thermostat bypass pipe gasket (3).
Courtesy of GENERAL MOTORS COMPANY

Remove the water pump fasteners (1) and (2) remove the water pump (3).
Discard the water pump seal (4).