Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Water Pump Housing Gasket (2) - Install a NEW gasket.
Water Pump Housing (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Water Pump Bolt (1) - Install and tighten [5x] 10 N.m (89 lb in)
Courtesy of GENERAL MOTORS COMPANY

Drive Belt Tensioner (2) - Install - Drive Belt Tensioner Replacement
Courtesy of GENERAL MOTORS COMPANY

Engine Wiring Harness Retainer (1) @ Engine Wiring Harness Bracket (2) - Install [2x]
Air Cleaner Assembly - Install - Air Cleaner Assembly Replacement
Fill the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static)
Start the engine and check for leaks.