Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Turbocharger Coolant Feed Pipe (6) - Install
- Engage the turbocharger coolant feed pipe hose clamp (5). Hose Clamp Replacement Guidelines - Spring Type
- Install a NEW gasket (4).
- Turbocharger Coolant Feed Pipe Fastener (3) - Install and tighten [2x] 10 N.m (89 lb in)
- Install NEW copper washers (2).
- Turbocharger Coolant Feed Pipe Hollow Screw (1) - Install and tighten 35 N.m (26 lb ft)
- Warm Up Three-Way Catalytic Converter Replacement (LTG) - Install
- Fill the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static)
CAUTION:
Refer to Fastener Caution .