LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Cooling System) >> Repair Instructions >> Radiator Inlet Hose Replacement (LKN) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static) 
  2. GM4322758Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Generator Battery Bracket (3) - Remove - Drive Motor Generator Battery Bracket Replacement (Drive Motor Generator Battery Cooling Blower) , or Drive Motor Generator Battery Bracket Replacement (Drive Motor Battery Radiator Surge Tank)

  3. GM4322239Courtesy of GENERAL MOTORS COMPANY

    Radiator Inlet Hose Clamp (1) - Disengage - Hose Clamp Replacement Guidelines - Spring Type 

  4. Radiator Inlet Hose (2) @ Radiator - Remove
  5. GM4322240Courtesy of GENERAL MOTORS COMPANY

    Radiator Inlet Hose Retainer (1) - Disengage

  6. Radiator Inlet Hose (2) @ Water Outlet - Remove
  7. Radiator Inlet Hose (2) - Remove