Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static)
- Remove the engine oil filter. Engine Oil and Oil Filter Replacement
- Warm Up Three-Way Catalytic Converter - Remove - Warm Up Three-Way Catalytic Converter Replacement (LTG)
- Oil Pump Flow Control Valve Heat Shield Replacement - Remove
Remove the engine oil cooler pipe fastener. (1)
- Disconnect the inlet and outlet hoses from the engine oil cooler. (2) Hose Clamp Replacement Guidelines - Spring Type
Remove the engine oil cooler connector (1).
- Remove the engine oil cooler. (2)
- Remove and DISCARD the seal. (3)