Engine Coolant Air Bleed Pipe Replacement (LTG)

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Turbocharger Coolant Return Pipe Replacement (LTG) Positive Crankcase Ventilation Hose/Pipe/Tube Replacement Disconnect the electrical wiring harness connector from the ignition coil.
1	Radiator Surge Tank Inlet Hose Clamp Hose Clamp Replacement Guidelines - Spring Type
2	Engine Coolant Air Bleed Pipe Bolt CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
3	Engine Coolant Air Bleed Pipe
4	Engine Coolant Air Bleed Pipe O-Ring Procedure Install a NEW O-ring seal.