Circuit/System Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition On/Vehicle in Service Mode.
- Verify the G10 Cooling Fan Motor activates when A/C is turned On.
- The cooling fan does not activate
Refer to Circuit/System Testing
- Go to next step: The cooling fan activates
- The cooling fan does not activate
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.
NOTE:
A slight delay may occur before the cooling fan activates.