LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Cooling System) >> Diagnostic Information and Procedures >> Cooling Fan Inoperative (LTG) >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector G10 Cooling Fan Motor.
  2. Verify that a test lamp illuminates between the ground circuit terminal 2 and B+.
    • If the test lamp does not illuminate 
    1. Ignition OFF, and all vehicle systems OFF, it may take up to 2 minutes for all vehicle systems to power down.
    2. Test for less than 2 Ω in the ground circuit end to end.
      • If 2 Ω or greater, repair the open/high resistance in the circuit.
      • If less than 2 Ω, repair the open/high resistance in the ground connection.
    • Go to next step: If the test lamp illuminates 
  3. Test or replace the G10 Cooling Fan Motor.