Typical Scan Tool Data
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fuel Rail Pressure Sensor 1 & Fuel Rail Pressure Sensor 2
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine at Idle Parameter Normal Range: 3.9 to 4.2 MPa (565 to 609 PSI) |
|||
| 5 V Reference | 655.4 MPa (95058 PSI) | 655.4 MPa (95058 PSI) | 655.4 MPa (95058 PSI) |
| Signal | 655.4 MPa (95058 PSI) | 655.4 MPa (95058 PSI) | 655.4 MPa (95058 PSI) |
| Low Reference | - | 655.4 MPa (95058 PSI) | - |
{ If equipped } Fuel Rail Temperature Sensor 1 & Fuel Rail Temperature Sensor 2
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine at Idle Parameter Normal Range: -40 to 115°C (-40 to 240°F) |
|||
| 5 V Reference | -40 | -40 | -40 |
| Signal | -40 | -40 | -40 |
| Low Reference | - | -40 | - |