LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Engine Controls And Fuel - 1.5L (LFV) - DTC P0010-DTC P0366) >> Diagnostic Information and Procedures >> DTC P0097-P0099 or P00F4-P00F6 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Circuit Description
Signal The control module input circuit has an internal resistance connected to 5 V.
Ground Grounded through the control module.
Component Description
B75C Multifunction Intake Air Sensor The intake air temperature sensor 2 is integrated in the mass air flow sensor.The intake air temperature sensor 2 varies its resistance depending on the temperature.The intake air humidity sensor uses the same signal circuit as the intake air temperature sensor 2. The intake air humidity sensor modulates the pulse width of the signal. The intake air temperature sensor 2 modulates the frequency of the signal. That means the signal is both, PWM and FM modulated.
K20 Engine Control Module The control module contains a microprocessor used to process input data to control outputs.
The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.