Conditions for Running the DTC

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

P0601, P0602, P0604, P0605, P0607, P060A, P060B, P0610, P061C, P0630, P160A, P160D, P160E, P161C, P264F

Ignition = On
Frequency the DTC runs = Continuously - After the running conditions are met

P0603, P062F

Ignition = On
Frequency the DTC runs = Once - Per drive cycle - After the running conditions are met

P0606, P062B

Run/Crank = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met

P064D, P064E, P134C, P27B5

Battery Voltage = Greater than 11 V
Engine = Running - Greater than 3 min

P163A, P163B

Ignition Voltage = Greater than 11 V
DTC P0090, P0091, P0092 = Not set

P16F3

DTC P0101, P0102, P0103, P0106, P0107, P0108, P2227, P2228, P2229, P2230 = Not set
Engine Speed. = Greater than 680 RPM
Frequency the DTC runs = Continuously - After the running conditions are met

P2610, P262B

Run/Crank = Inactive
Frequency the DTC runs = Once - After ignition Off - After the running conditions are met - For 20 s