Circuit/System Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the engine cranks.
- If the engine does not crank
Refer to Starter Malfunction (9 Speed Automatic Transmission Without KL9) , or Starter Malfunction (9 Speed Automatic Transmission With KL9) .
- Go to next step: If the engine cranks
- If the engine does not crank
- Ignition ON.
- Verify DTC P0562 or P0563 is not set.
- If DTC P0562 or P0563 is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: DTC P0562 or P0563 is not set
- If DTC P0562 or P0563 is set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing.
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.