LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Engine Controls And Fuel - 2.0L (LTG) - DTC P0340-DTC P31BF And Symptoms) >> Diagnostic Information and Procedures >> DTC P0627-P0629 or P12A6 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

For an overview of the component/system, refer to:Fuel System Description

Circuit Description
Control The output circuit is switched to 12 V to activate the component.
Component Description
K20 Engine Control Module The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.
K111 Fuel Pump Driver Control Module The control module K111 supplies the fuel pump with a PWM signal in order to achieve the desired fuel line pressure.

When the ignition is turned On, the ECM sends a 12 V signal to the control module K111 to enable the fuel pump. If the engine is not started, the control module K111 turns the fuel pump Off after 6 s.

scientia non olet · About LEMON Manuals