LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Automatic Transmission - VT40 (MRG) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal

Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
GM4663878Courtesy of GENERAL MOTORS COMPANY
Manual Shift Detent Lever with Manual Shift Detent Lever Spring and Park Pawl Actuator Removal

Callout Component Name
1 Manual Shift Detent Spring Bolt M6 X 25.65
Procedure 
Remove and DISCARD the bolt.
2 Manual Shift Detent Lever Spring
3 Manual Shift Detent Lever Hub Pin

Procedure

  1. Use a punch from the top to remove the pin.
  2. Remove and DISCARD, pin is not reusable.
4 Manual Shift Detent Lever Shaft
5 Manual Shift Detent Lever
6 Park Pawl Actuator