Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Installation
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Manual Shift Detent Lever with Manual Shift Detent Lever Spring and Park Pawl Actuator Installation
| Callout | Component Name |
|---|---|
| 1 | Manual Shift Detent Lever |
| 2 | Park Pawl Actuator |
| 3 | Manual Shift Detent Lever Shaft Procedure Lubricate the shaft with ATF to prevent damage to the manual shift shaft seal during installation. |
| 4 | Manual Shift Detent Lever Hub Pin
CAUTION:
Refer to Fastener Caution . Procedure
Specification 7.9 mm (0.38 in) (a) |
| 5 | Manual Shift Detent Lever Spring |
| 6 | Manual Shift Detent Spring Bolt M6 X 25.65 Procedure Install NEW bolts. Do NOT reuse old bolts. Tighten 9 N.m (80 lb in) |