Input Speed Sensor Removal

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Automatic Transmission Speed Sensor Bolt M6 X 25 CAUTION: This vehicle is equipped with torque-to-yield or single use fasteners. Install a NEW torque-to-yield or single use fastener when installing this component. Failure to replace the torque-to-yield or single use fastener could cause damage to the vehicle or component. Procedure Remove and DISCARD the bolt. Special Tools DT-48285 Torque Socket Equivalent regional tools:Special Tools
2	Automatic Transmission Input Speed Sensor

Callout

Component Name

Automatic Transmission Speed Sensor Bolt M6 X 25

CAUTION:

This vehicle is equipped with torque-to-yield or single use fasteners. Install a NEW torque-to-yield or single use fastener when installing this component. Failure to replace the torque-to-yield or single use fastener could cause damage to the vehicle or component.

Procedure
Remove and DISCARD the bolt.
Special Tools
DT-48285 Torque Socket
Equivalent regional tools:Special Tools

Automatic Transmission Input Speed Sensor