Front Differential Drive Pinion Gear Bearing Overhaul
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Front Differential Drive Pinion Gear Bearing Removal
| Callout | Component Name |
|---|---|
| 1 | Front Differential Drive Pinion Gear Bearing
NOTE:
Use two 3/8 X 24 X 3 inch bolts with J-8433 Puller Bar Special Tools
Equivalent regional tools:Special Tools |
Front Differential Drive Pinion Gear Bearing Installation
| Callout | Component Name |
|---|---|
| 1 | Front Differential Carrier Bearing
NOTE:
Pressing against the bearing assembly can damage the bearing and cause premature bearing failure. Special Tools J-8107-4 Gear and Bearing Installer Equivalent regional tools:Special Tools |