Control Valve Body Disassemble
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Control Valve Body Spacer Plate Disassemble
| Callout | Component Name |
|---|---|
| 1 | Control Valve Body Spacer Plate Retainer [2x] |
| 2 | Control Valve Body Spacer Plate
NOTE:
Inspect the spacer plate bolt pass through holes for damage or brinelling. Replace as necessary. |
| 3 | Control Valve Body Locating Pin [2x] |
| 4 | Variable Feed Solenoid Clutch Accumulator Piston [3x] |
| 5 | Variable Feed Solenoid Clutch Accumulator Piston Spring [3x] |
| 6 | Variable Feed Solenoid Clutch Accumulator Piston [3x] |
| 7 | Variable Feed Solenoid Clutch Accumulator Piston Spring [3x] |
Control Valve Channel Plate Disassemble
| Callout | Component Name |
|---|---|
| 1 | Valve Body Bolt [4x] M5 x 30 |
| 2 | Control Valve Channel Plate |
| 3 | Control Valve Body Spacer Plate
NOTE:
Inspect the spacer plate bolt pass through holes for damage or brinelling. Replace as necessary. |
| 4 | Control Valve Body Ball Check Valve [2x] |
| 5 | Control Valve Body Ball Check Valve |
| 6 | Control Valve Body Locating Pin [2x] |