Circuit/System Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON/Vehicle In Service Mode.
- Verify that DTC P24EF is not set.
- If DTC P24EF is set
Replace the control module setting the DTC.
- Go to next step: If DTC P24EF is not set
- If DTC P24EF is set
- Verify that DTC P24F0 is not set.
- If DTC P24F0 is set
Refer to Circuit/System Testing - P24F0.
- Go to next step: If DTC P24F0 is not set
- If DTC P24F0 is set
- Verify that DTC P24F1 is not set.
- If DTC P24F1 is set
Refer to Circuit/System Testing - P24F1.
- Go to next step: If DTC P24F1 is not set
- If DTC P24F1 is set
- All OK.