LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B2755 or B2765 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Press the following button:Memory 1

    Verify the scan tool parameter:Driver Seat Memory Recall Switches = Memory 1

    • If not the specified state 

      Refer to: Circuit/System Testing.

    • Go to next step: If the specified state 
  3. Press the following button:Memory 2

    Verify the scan tool parameter:Driver Seat Memory Recall Switches = Memory 2

    • If not the specified state 

      Refer to: Circuit/System Testing.

    • Go to next step: If the specified state 
  4. Press the following button:Exit

    Verify the scan tool parameter:Driver Seat Memory Recall Switches = Exit

    • If not the specified state 

      Refer to: Circuit/System Testing.

    • Go to next step: If the specified state 
  5. Press the following button:Set Button

    Verify the scan tool parameter:Driver Seat Memory Set Switch = Set

    • If not the specified state 

      Refer to: Circuit/System Testing.

    • Go to next step: If the specified state 
  6. All OK.
scientia non olet · About LEMON Manuals