LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B1735, B1740, B1745, B1750, B1755, B1760, B1815, or B1820 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Operate the component:S64D Seat Adjuster Switch - Driver - Select each position
    • {Down/Released/Up}Verify the scan tool parameter:Driver Seat Cushion Front Vertical Switch = Down/Inactive/Up
    • {Down/Released/Up}Verify the scan tool parameter:Driver Seat Cushion Rear Vertical Switch = Down/Inactive/Up
    • {Forward/Released/Rearward}Verify the scan tool parameter:Driver Seat Horizontal Switch = Forward/Inactive/Rearward
    • {Forward/Released/Rearward}Verify the scan tool parameter:Driver Seat Back Switch = Forward/Inactive/Rearward
    • If not the specified state 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified state 
  3. All OK.
scientia non olet · About LEMON Manuals