LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Antilock Brake System - Hybrid (Hp4)) >> Diagnostic Information and Procedures >> DTC C144B >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Verify DTC C144B is not set.
    • If DTC C144B is set 

      Program the control module:K17 Electronic Brake Control Module

    1. Verify DTC C144B is not set.
      • If set as a current DTC - Replace the component:K17 Electronic Brake Control Module
      • Go to next step: If the DTC is not set
    2. All OK.
    • Go to next step: If the DTC is not set 
  3. All OK.