LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Antilock Brake System - Hybrid (Hp4)) >> Diagnostic Information and Procedures >> DTC C05A3 or C05A4 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Test drive the vehicle.

    All sensors must show the same speed when driving in a straight line at a speed greater than 40 km/h (25 MPH).

  2. Verify the following parameters are within 1.6 km/h (1 MPH) of each other:
    • B5LF Wheel Speed Sensor - Left Front
    • B5LR Wheel Speed Sensor - Left Rear
    • B5LR Wheel Speed Sensor - Left Rear
    • B5RR Wheel Speed Sensor - Right Rear
    • If not within 1.6 km/h (1 MPH) of each other 

      Refer to: Circuit/System Testing

    • Go to next step: If within 1.6 km/h (1 MPH) of each other 
  3. All OK.