Circuit/System Description
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
For an overview of the component/system, refer to:ABS Description and Operation
| Circuit | Description |
|---|---|
| B+ - Terminal 1 | The output circuit is switched from ground to 12 V to activate the component. |
| Ground - Terminal 14 | Grounded through the control module. |
| Component | Description |
|---|---|
| B119 Multi-axis Acceleration Sensor | The yaw rate, lateral and longitudinal acceleration sensors are internal to the inflatable restraint sensing and diagnostic module. |
| K17 Electronic Brake Control Module | When ABS, traction control or stability control operation is required, the electronic brake control module activates the pump motor. |