Component Testing
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Accessory Power Outlet 110V AC
- Ignition OFF, remove the X81 Accessory Power Receptacle - 110V AC.
- Test for infinite resistance between terminal 3 X2 and terminal 3 X1.
- If less than infinite resistance
Replace X81 Accessory Power Receptacle - 110V AC.
- If less than infinite resistance
- Test for less than 2 Ω between the following terminals:
- The terminal 3 X2 and the applicable receptacle terminal
- The terminal 3 X1 and the applicable receptacle terminal
- If greater than the 2 Ω
Replace the X81 Accessory Power Receptacle - 110V AC.
- Test for infinite resistance between terminal 1 X1 and terminal 1 X2.
- If less than the specified range
Replace X81 Accessory Power Receptacle - 110V AC.
- Go to next step: If infinite resistance
- If less than the specified range
- Connect a 110 V extension cord without a connected device to the X81 Accessory Power Receptacle - 110V AC.
- Test for less than 5 Ω between terminal 1 X1 and terminal 1 X2.
- If greater than the 5 Ω
Replace the X81 Accessory Power Receptacle - 110V AC.
- Go to next step: If less than 5 Ω
- If greater than the 5 Ω
- All OK