Causes of Burned Clutch Plates
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
The following conditions can result in a burned clutch plate:
- Incorrect usage of clutch or apply plates
- Engine coolant or water in the transmission fluid
- A cracked clutch piston
- Damaged or missing seals
- Low line pressure
- Valve body conditions
- The valve body face is not flat.
- Porosity is between channels.
- The valve bushing clips are improperly installed.
- The checkballs are misplaced.
- The Teflon® seal rings are worn or damaged.