Installation Procedure
Power Brake Booster (1) - Install
- CAUTION:
Power Brake Booster Bolt (1) - Tighten 19 N.m (14 lb ft) [2x]
Power Brake Booster Vacuum Sensor (1) - Install
- Power Brake Booster Vacuum Sensor Electrical Connector - Connect
Power Brake Booster Vacuum PipeFitting (1) @Power Brake Booster Vacuum Sensor - Connect
- NOTE:
Install a NEW brake pedal retainer.
Retainer (1) - Install
- NOTE:
Ensure the locking tabs on the brake pedal retainer are fully engaged in the brake pedal arm.
Brake Pedal (1) - Connect
- Electronic Traction Control Brake Pressure Modulator Valve Replacement - Install
- Brake Master Cylinder Replacement - Install