LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Without draining the coolant and without disconnecting the hoses, position aside the radiator surge tank. - Radiator Surge Tank Replacement (LTG)Radiator Surge Tank Replacement (LFV)
  2. Disconnect the brake fluid level sensor electrical connector.
  3. GM4234161

    Using an appropriate tool, lift upward to release the brake fluid level sensor locking tab (1) .

  4. GM4234167

    Brake Fluid Level Sensor (1) - Remove

scientia non olet · About LEMON Manuals