Front Seat Cushion Frame Replacement (Driver Power)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedure Front Seat Cushion Cover and Pad Replacement
1	Driver or Passenger Seat Back Frame Fastener [4x] CAUTION: Refer to Fastener Caution . Remove the seat back frame bolts. Prepare the bolts for installation as follows: Remove all traces of the adhesive patch from the bolts and the mating threads using the appropriate tools. Clean the threads of the bolts and mating threads with denatured alcohol or equivalent and allow to dry. Apply thread locking adhesive to the bolts. Adhesives, Fluids, Lubricants, and Sealers Ensure there are no gaps in the thread locking adhesive once applied to the bolt. Tighten 45 N.m (33 lb ft)
2	Driver or Passenger Seat Cushion Frame Procedure Disconnect the electrical connector. Transfer components as necessary.

Callout

Component Name

WARNING:

Driver or Passenger Seat Back Frame Fastener [4x]

CAUTION:

Remove the seat back frame bolts.
Prepare the bolts for installation as follows:
1. Remove all traces of the adhesive patch from the bolts and the mating threads using the appropriate tools.
2. Clean the threads of the bolts and mating threads with denatured alcohol or equivalent and allow to dry.
3. Apply thread locking adhesive to the bolts. Adhesives, Fluids, Lubricants, and Sealers
4. Ensure there are no gaps in the thread locking adhesive once applied to the bolt.

Tighten
45 N.m (33 lb ft)

Driver or Passenger Seat Cushion Frame

Procedure