LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Impala Premier >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Power Brake Booster Vacuum Sensor Replacement >> Installation Procedure

Installation Procedure

  1. GM2607860

    Install the power brake booster vacuum rear pipe hose (1) to the power brake booster vacuum rear pipe and secure the clamp.

  2. Install the power brake booster vacuum sensor (2) to the power brake booster vacuum rear pipe and secure the clamp.
  3. GM2607858

    Install the power brake booster vacuum sensor (1) to the power vacuum brake booster.

  4. GM2607855

    Install the power brake booster vacuum rear pipe to the clips (1) on the vehicle front of dash.

  5. Connect the power brake booster vacuum sensor electrical connector.
scientia non olet · About LEMON Manuals