Removal Procedure
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- If equipped with RPO LFX, remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LFX) .
- Without draining the engine coolant and without disconnecting the hoses, position aside the radiator surge tank. Refer to Radiator Surge Tank Replacement (LFX) .
- Disconnect the electronic brake control module (EBCM) electrical connector.
Disconnect the secondary brake pipe fitting (1) at the master cylinder.
- Plug the master cylinder outlet port to prevent brake fluid loss and contamination.
Disconnect the secondary brake pipe fitting (1) at the brake pressure modulator valve (BPMV).
- Plug the BPMV inlet port to prevent brake fluid loss and contamination.
Release the secondary brake pipe from the retaining clips (1).
- Remove the BPMV secondary brake pipe.